Overmoulding Custom Injection Mold Shell Metal Stamping Mould
Mould Information:
| Mold information | Overmoulding Custom Injection Mold Shell Metal Stamping Mould |
| Product Material | ABS,PP,PC,PA,PMMA,PS,POM and etc. |
| Moldbase | FUTABA,LKM,HASCO,DME you can choose |
| Cavity material | 45#,50#,P20,H13, 718 2738, NAK80, S136, SKD61 etc |
| Runner | Cold/Hot runner |
| Cavity | Multi or single cavity |
| Standart parts | Hasco |
| Gate type | Side gate,Sub gate,Pin point gate,Edge gate etc |
| Treatment | Heat treatment and Nitriding,polish ect. |
| HRC | H45~52 |
| Tooling lifespan | 300,000-1,000,000 shots |
| Machine type | 90~650Ton |
| The standard of appearance of the products for stripe | MT(Mold Tech),YS,HN series |
| Lead time | 15~30 days |
Custom Injection Mold Application:
Plastic Injection Mould is used to create many things such as wire
spools, packaging, bottle caps, automotive parts and components,
toys, pocket combs, some musical instruments (and parts of them),
one-piece chairs and small tables, storage containers, mechanical
parts (including gears), and most other plastic products available
today. Plastic Injection Mould is the most common modern method of
manufacturing plastic parts; it is ideal for producing high volumes
of the same object.
Custom Injection Mold Process characteristics:
Plastic Injection Mould uses a ram or screw-type plunger to force
molten plastic or rubber material into a mould cavity; this
solidifies into a shape that has conformed to the contour of the
mould. It is most commonly used to process both thermoplastic and
thermosetting polymers, with the volume used of the former being
considerably higher. Thermoplastics are prevalent due to
characteristics that make them highly suitable for Plastic
Injection Mould , such as ease of recycling, versatility for a wide
variety of applications, and ability to soften and flow on heating.
Thermoplastics also have an element of safety over thermosets; if a
thermosetting polymer is not ejected from the injection barrel in a
timely manner, chemical crosslinking may occur causing the screw
and check valves to seize and potentially damaging the Plastic
Injection Mould machine.
Plastic Injection Mould consists of the high pressure injection of
the raw material into a mould, which shapes the polymer into the
desired form. Moulds can be of a single cavity or multiple
cavities. In multiple cavity moulds, each cavity can be identical
and form the same parts or can be unique and form multiple
different geometries during a single cycle. Moulds are generally
made from tool steels, but stainless steels and aluminium moulds
are suitable for certain applications. Aluminium moulds are
typically ill-suited for high volume production or parts with
narrow dimensional tolerances, as they have inferior mechanical
properties and are more prone to wear, damage, and deformation
during the injection and clamping cycles; however, aluminium moulds
are cost-effective in low-volume applications, as mould fabrication
costs and time are considerably reduced. Many steel moulds are
designed to process well over a million parts during their lifetime
and can cost hundreds of thousands of dollars to fabricate.
FAQ
1. When can I get the price?
A: We usually quote within 24 hours after we get your inquiry.
2. How long is the lead time for mold?
A: It depends on the mold’s size and complexity. Normally, it nees
about 25-35 days.
3. I don't have 3D drawing, how should I start the new project?
A: You can provide us a sample, we will make 3D drawing design.
4. Can we mass produce in your local?
A: Yes, you can leave the mould in our factory, we can produce for
you.
5. Can we get a sample when mould finished?
A: Yes, we usually send out samples for customers' checking, then
mass production after samples comfirmed.
6. Before shipment, how to make sure the products quality?
1) We have QC to inspect the products before each shipment.
2) We can send you videos to show the production process.
3) You can come to visit our factory or ask a third party for
inspection.
7. How could I pay?
A: Paypal, Western Union, T/T are acceptable, so just let us know
which is convenient for you.
8. How to ship?
A: By sea/ By air/ By Express.
